Automatic Geomembrane Pond Liner Welding Machine Provided Plastic Welder

• Customization: Available
• Application: Geomembrane Welding Machine
• Cooling Way: Air Cooling
• Model NO.: GMM1001
• Control: Automatic
• Frequency Range: Low Frequency
• Electric Current: AC
• Style: Portable
• Power: Electric
• Heating Temperature: 50-500ºC
• Welding Speed: 1-5.5m/Min
• Overlap Width: 10cm
• Weld Strength: Greater 90% Base Metal
• Transport Package: Aluminum Box
• Specification: 800w/1100w
• Trademark: Jubo
• Origin: Jiangxi, China
• Package Size: 41.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 6.000kg

Product Description

Automatic Geomembrane Welding Machine Pond Liner Welding Machine Provided PE PP PVC Plastic Welder 

Product Overview

 Plastic HDPE Geomembrane Climbing Welder Hot Wedge Welding Machine

Hot wedge welder is a hot wedge welder for welding HDPE, LDPE, EVA, PVC, ECB, PP thermo plastic materials, which is used in waterproofing projects like tunnels, subway, water conservancy, farming, solid waste landfills, chemical mining industry, sewage treatment, roofing and so on. Our welder is your good option of waterproofing project in China, and save your cost from European/US transporter market.

Tips:

1. For welding membrane with thickness below 1.0 mm, the silica pressure roller is the suitable choice.

2. For welding membrane with thickness above 1.0mm, the steel pressure roller is the best choice.
3. If the material is PVC, this model can weld from 0.2-2.0mm, and you can choose to assemble it with steel hot wedge.
4. Any customized demands, you can ask us directly. We have professional technicians team.

Advantage:                                             Applications:

-Standardized production                         -Anti-seepage applications 
-State-of-the-art control system               -Aquaculture
-Excellent pressure regulation                 -Roofing construction

-Exceptional roller mechanism                -Sewage treatment 
-Superior heating system                         -Tunnels
-Waterproof                                                -Subways

-This Geomembrane welding machine model features small size and exceptional thermal wedge design.

-It is also lightweight for convenient usage.

Rated voltage	230V/customized
Rated power	800W/1100W
Frequency	50/60HZ
Heating temperature	50-500ºC
Welding speed	1-5.5m/min
Welding material thickness	Single layer film thickness  Rubber wheel 0.3-1.5mm  Steel wheel 1.0-2.0mm
Welding seam width	three seams: 16mm*3, cavity 12mm; two seams: 17mm*2, cavity 12mm
Weld strength	≥90% base metal (tensile strength in shear direction)
Overlap width	10cm
Insulation level	Class II
Body weight	5kg

Details Images

 

                                 OPERATING INSTRUCTION
1.turn on the power switch, select a certain temperature and speed, take a few presses totest welding,
because of the ambient temperature, the thickness of the material is not thesame, the welding selection
temperature of the same material is different, in the case ofthe speed (about 2m/min) unchanged, the
selection temperature from low to high temp--erature (about 250° C-350 C) slowly adjusted to
determine the best welding effect.

2.Trim the edge of the material to be welded straight, face forward, overlap the leftbottom and right top.

3.after determining the temperature and speed, the material to be welded is insertedbetween the two
presses, so that the fuselage is parallel to the edge of the mother village.and the press rod handle
can be welded by itself.

4.when the material is welded to the end, the press rod handle is pressed down in timeso that the
upper and lower press wheels are in a separate state.

5.the welded material and another material into a "T" lap welding method (Figure 1),the hot knife side
of the bypass close to the welding mark diagonal cut length of about150mm.


Packing Method


FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q:Is the quality of your products stable?
A:The company has a complete QC system, and each batch of products will be sampled and the samples will be kept for 5 years.
Q:Can you do OEM?
A:Yes, of course. We can produce the products as per your request.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to quantity.       
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance,balance before shipment. If you have another question, please feel free to contact us at any time.